Buying a bar fridge without checking dimensions is like buying shoes without trying them on. Will it fit under your bench? Through the doorway? In the car boot for delivery? This comprehensive dimensions guide covers every size category so you can buy with confidence.

Bar Fridge Size Categories

Category	Capacity	Typical Dimensions (WxDxH)	Best For
Micro Mini	26-46L	430-475W x 450-480D x 500-520H mm	Bedrooms, caravans, hotel rooms
Mini	46-70L	430-475W x 480-530D x 510-700H mm	Home office, man cave, bedroom
Compact	70-100L	440-500W x 500-560D x 700-850H mm	Kitchen, granny flat, small bar
Under Bench	100-165L	500-600W x 520-600D x 820-870H mm	Kitchen bench cutout, built-in bar
Standard	165-280L	540-600W x 560-650D x 1200-1500H mm	Garage, entertaining area, bar
Full Size	280-405L	540-620W x 560-680D x 1600-1900H mm	Dedicated bar, commercial, serious entertainer

Under Bench Bar Fridge Dimensions — The Critical Measurement

Under-bench installation is the most dimension-sensitive use case. Standard Australian bench height is 870-900mm. Here's what you need to know:

• Maximum fridge height: 830-850mm (allows for levelling feet and airflow)
• Depth clearance: Most under-bench fridges are 520-600mm deep. Measure from the wall to the front of your bench — you need the door to open freely.
• Width: Standard kitchen cabinet openings are 600mm. Most under-bench fridges fit within this.
• Front venting is essential: Under-bench fridges MUST vent from the front. Rear-venting models will overheat in enclosed spaces.

Popular Under Bench Models & Their Dimensions

Model	Capacity	W x D x H (mm)	Key Feature
SK116R-SS	116L	500 x 525 x 840	Stainless steel, glass door
SK126R-HD	132L	500 x 525 x 845	Heated glass (no condensation)
SK126L-HD	132L	500 x 525 x 845	Left hinge, heated glass

👉 Browse All Under Bench Fridges

How to Measure for a Bar Fridge

1. Measure the space — Width, depth, and height of the opening or floor space.
2. Add clearance — Allow 50mm on each side and behind for rear-venting models. Front-venting models need no rear clearance.
3. Check door swing — The door needs room to open at least 90 degrees. Some models offer reversible hinges (left or right).
4. Measure doorways — Make sure the fridge fits through any doorways between your car and the final location.
5. Check the floor — Ensure the floor is level. Use adjustable feet for minor adjustments.

Two Door vs Single Door — Dimensions Impact

Two-door (dual zone) bar fridges are wider but often shorter than equivalent single-door uprights:

• Dual Zone 2 Door: Typically 900-1200mm wide, 500-600mm deep, 840-870mm high — perfect under bench
• Single Door Upright: Typically 540-600mm wide, 560-650mm deep, 1200-1900mm high — requires vertical space

👉 Browse 2 Door Bar Fridges | Browse 1 Door Bar Fridges

Common Dimension Mistakes

• Forgetting door swing: A 500mm deep fridge with a 70mm thick door needs 570mm+ total depth.
• Ignoring power cord clearance: The plug adds 30-50mm to the back. Factor this in.
• Not measuring diagonally: If moving through a narrow doorway, measure the diagonal of the fridge.
• Assuming "under bench" means "under 900mm": Some models marketed as under-bench are actually 870mm+ with feet extended.

Ready to Shop by Size?

• Mini Bar Fridges (26-70L)
• Small Bar Fridges (70-100L)
• Under Bench Fridges (100-165L)
• Tall Bar Fridges (200L+)
• Dual Zone Bar Fridges
• All Bar Fridges

---

Browse Related Collections

• Quiet Bar Fridges — under 40dB for bedrooms and offices
• Man Cave Bar Fridges — branded and themed for home bars