Under Bench Fridges
Showing 13–24 of 283 products
Schmick 164L Under Bench Bar Fridge – SK156R-HD (Stainless, Heated Glass, Right)
| SKU | SK156R-HD |
| Cap | 164L |
| Size (mm) | W595×D586×H840 |
| Noise | 43dB |
| Door | Glass |
| Stock | In Stock |
Rhino 330L Commercial 3 Door Bar Fridge – SG3S-B
| SKU | SG3S-B |
| Cap | 330L |
| Size (mm) | W1350×D500×H840 |
| Noise | 47dB |
| Door | Glass |
| Stock | In Stock |
Schmick 399L Upright Bar Fridge – SK386-B-HD
| SKU | SK386-B-HD |
| Cap | 399L |
| Size (mm) | W1345×D590×H840 |
| Noise | 43dB |
| Door | Glass |
| Stock | In Stock |
Rhino SG2S-B 208L Commercial 2 Door Bar Fridge — Black Sliding Glass
| SKU | SG2S-B |
| Cap | 208L |
| Size (mm) | W900×D515×H840 |
| Noise | 43dB |
| Door | Glass |
| Stock | In Stock |
Rhino 330L Commercial 3 Door Bar Fridge – SG3H-B-HD
| SKU | SG3H-B-HD |
| Cap | 330L |
| Size (mm) | W1350×D500×H840 |
| Noise | 47dB |
| Door | Glass |
| Stock | In Stock |
Schmick 399L Upright Bar Fridge – SK386-HD
| SKU | SK386-HD |
| Cap | 399L |
| Size (mm) | W1345×D590×H840 |
| Noise | 43dB |
| Door | Glass |
| Stock | In Stock |
Schmick 274L Under Bench Bar Fridge – SK245-SD
| SKU | SK245-SD |
| Cap | 274L |
| Size (mm) | W870×D586×H875 |
| Noise | 43dB |
| Door | Solid |
| Stock | Sold Out |
Schmick 164L Under Bench Bar Fridge – SK146R-B-HD
| SKU | SK146R-B-HD |
| Cap | 164L |
| Size (mm) | W550×D586×H875 |
| Noise | 43dB |
| Door | Glass |
| Stock | In Stock |
Schmick 164L Under Bench Bar Fridge – SK156L-SD (Stainless, Solid, Left)
| SKU | SK156L-SD |
| Cap | 164L |
| Size (mm) | W595×D586×H840 |
| Noise | 41dB |
| Door | Glass |
| Stock | In Stock |
Rhino SG2H-NC 208L Night Club Commercial 2 Door Bar Fridge — Multi-Coloured LED
| SKU | SG2H-NC |
| Cap | 208L |
| Size (mm) | W900×D500×H840 |
| Noise | 43dB |
| Door | Glass |
| Stock | In Stock |
Schmick 164L Under Bench Bar Fridge – SK146R-HD
| SKU | SK146R-HD |
| Cap | 164L |
| Size (mm) | W550×D586×H875 |
| Noise | 43dB |
| Door | Glass |
| Stock | In Stock |
Rhino SG2H-SD 208L Commercial 2 Door Bar Fridge — Stainless Solid Door
| SKU | SG2H-SD |
| Cap | 208L |
| Size (mm) | W900×D500×H840 |
| Noise | 43dB |
| Door | Solid |
| Stock | In Stock |
About Under Bench Fridges
Front-venting under bench bar fridges — also searched as under counter or undercounter fridges — built to slide beneath a benchtop and breathe through the front grille, so the sides and back can be fully enclosed. 77 units in the range, from a 430mm-wide 70L single door up to a 1350mm-wide 399L three-door, priced $647–$4,605.
Measure before you order: heights across the range run 650–875mm (most sit around 840mm), so check your floor-to-benchtop-underside clearance first, then the cavity width — units run 430mm to 1350mm wide. Front venting means zero side or rear clearance is needed; allow a few millimetres each side for a clean slide-in fit, and confirm the "fitted height" spec on each listing.
Single-door glass models are the core of the range (51 units), with 15 twin-door and 9 three-door formats for wider benches — 65 glass door for display, 12 solid door. Nearly every unit is Schmick (42) or Rhino (34), and most carry a 2-year warranty — the spec table on each listing has the exact figure. For a fully seamless look, see our integrated models with panel-ready doors that match your cabinetry.
Buying Guides
- How Much Does a Bar Fridge Cost to Run?
- Bar Fridge Noise Levels Compared
- Bar Fridge Dimensions: Every Size Explained
Wider bench to fill? The multi-door under bench formats have their own collections: 2 door under bench bar fridges (side-by-side twin glass doors) and 3 door under bench bar fridges (330–399L across 1345–1350mm of frontage).
Read our guide: Best 2-Door Under-Bench Bar Fridge Australia 2026 →
Frequently Asked Questions
-
The fridge expels heat from the front base, not the rear. Critical for built-in — zero back/side clearance needed. Rear-venting models cannot be built in.
-
Measure width, depth, and height from floor to underside of benchtop. Allow 5–10mm tolerance. Check fitted dimensions on each listing.
-
Most fit standard 850–900mm. Typical fitted height is 820–870mm. Measure your actual bench.
-
Many have reversible hinges. Check specs for ‘reversible hinge’.
-
Most run 38–45dB. Cabinetry slightly muffles sound. For open-plan kitchens, aim for under 40dB.
-
Under-bench keeps its own front panel. Integrated accepts a custom panel matching your cabinetry. Integrated costs more but is visually invisible.
